Is not a Stretch Film
It has a sticky side on the inside of the roll
Tie on the bottom corner edge and walk around the pallet applying a MODERATE tension.
As the film is re-inforced at the edges it does not have to be stretched to achieve tension as with conventional wrap.
Process
Requires less effort to apply
Usually you will apply 2 wraps at the base of pallet, continue up with a 50 - 75% overlap depending on the product being wrapped. Finish off with 2 wraps around the top. Simple & Effective.
Benefits
- Clear Film - easy to recycle.
- Less Wastage - 600 mtrs. film on a roll.
- Provides greater load stability due to elastic band effect.
- Pallets do not stick together.
- No damage to rolls if dropped by operator.
- Mimalite - has re-inforced edges.
"It's a Technique"
Initially it will take practice to get the routine and apply the right amount of tension. We suggest a slight tension (say 50mm - 70mm pull), when you have reached the following corner.